Fangpusun MPPT 80A/150V Charge Controller

Product Name
Fangpusun MPPT 80A/150V Charge Controller
Share with Friends
Product Detail

The Fangpusun Maximum Power Point Tracking (MPPT) 80A charge controller is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Technologies. The innovative Fangpusun MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, Fangpusun charge controller can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104° F (40° C).
The integrated OutBack network communications allows Fangpusun series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration

Specifications 2
Nominal Battery Voltages  12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
Maximum Output Current  80amps @ 104° F (40° C) with adjustable current limit
Maximum Solar Array STC Nameplate  12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts
NEC Recommended Solar Array STC Nameplate  12 VDC systems 750 Watts / 24 VDC systems 1500 Watts / 48 VDC systems 3000 Watts / 60 VDC Systems 3750 Watts
PV Open Circuit Voltage (VOC) 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
Standby Power Consumption  Less than 1 Watt typical
Power Conversion Efficiency  80Amps in at 48 VDC System voltage - Typical
Charging Regulation  Five Stages Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set points  10 to 80 VDC user adjustable with password protection
Equalization Charging Programmable Voltage Setpoint and Duration - Automatic Termination when completed
Battery Temperature Compensation Automatic with optional RTS installed / 5.0 mV per ° C per 2V battery cell
Voltage Step-Down Capability  Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input
Programmable Auxilary Control Output  12 VDC output signal which can be programmed for different control applications

(Maximum of 0.2 amps DC)
Status Display  3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
Remote Display and Controller  Optional Mate or Mate2 with RS232 Serial Communications Port
Network Cabeling  Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Data Logging  Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float, Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production
Positive Ground Applications  Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications)
Operating Temperature Range 

  Minimum -40° to maximum 60° C

(Power capacity of the controller is automatically derated when operated above 40° C)
Environmental Rating  Indoor Type 1
Knockouts One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom
Weight - Unit 
11.65 lbs (5.3 kg)

Dimensions - Unit 
13.5 x 5.75 x 4" (40 x 14 x 10 cm)